Moisture Mitigation

LiquiDam EZ™

Addressing MVER with TEC Liquidam EZ

LiquiDam EZ™


NEW INNOVATION!
LiquiDam EZ™ is a 1-part, highly-engineered, polymeric emulsion moisture mitigation formula. It is formulated to be applied to damp or new concrete, as little as 48 hours old with a moisture vapor emission rate (MVER) less than or equal to 25 lbs. per 1,000 ft2 per 24 hours (0.12 kg/m2 per 24 hours) or a maximum relative humidity of 100%. It is also designed to reduce the MVER from 25 lbs. to
3 lbs. per 1,000 ft2 per 24 hours (0.015 kg/m2 per 24 hours).

LiquiDam EZ™ is colored blue for visual assurance of coverage during the application process. Two coats are required to fully seal the substrate; and it quickly dries in as soon as 4-5 hours. Once dry, this product doesn’t require a primer before the application of TEC® surface preparation products. LiquiDam EZ™ is a moisture vapor barrier for the installation of floor coverings, tile, stone and concrete toppings. Ideal for use with other TEC® adhesives, patch, underlayment, leveler and mortar products.

  •  Direct application onto green concrete up to 100% RH
  • 1-part, simply hand stir before use
  • No primer required, before the application of surface preparation products
  • No waste and no special handling required
  • Mechanical preparation, such as shot blasting, may not be required, especially for clean, sound concrete (see Section 5 for Surface Evaluation and Preparation Guidelines)
  • Can be installed over burnished concrete (see Evaluation Condition 3)
  • Same day flooring installation – dries within 4-5 hours
  •  Less than 0.10 Perm Rating (ASTM E96)
  • Low VOC. Contributes to LEED® project points
  • 5 U.S. gallon plastic pails (18.93 L)

Product Added.

View My Submittal.

Add to My Submittal
Why use the My Submittal tool? Adding an item to your My Submittal form allows you to easily compile a list of products that can then be submitted for documentation such as SDS/Data sheets and warranty information.

PDF Downloads

LiquiDam EZ™

SDS

We are updating our MSDS, now called SDS, to support the Global Harmonization System of Labeling and Classification (GHS). This new UN designed system for safety data sheets provides a unified standard for communicating the classification of chemicals and associated hazards. Click the icon to learn more.

EnglishDownload

PDS

EnglishDownload EspañolDownload

LiquiDam EZ™ Sell Sheet

EnglishDownload

Moisture Control System Warranty

EnglishDownload English (Canadian)Download EspañolDownload Français (Canadien)Download

LiquiDam EZ™ One-Day Installation Flyer

EnglishDownload

More about LiquiDam EZ™