Overlayments

Level Set® Wear Topping

Level Set® Wear Topping


NEW! TEC® Level Set® Wear Topping is a premium, calcium aluminate cement-based, high strength topping designed for use in malls, retail establishments, lobbies, high end hotels, light manufacturing and warehouses, where a hard, flat, smooth surface is desired. Also used for industrial applications subject to constant foot and vehicle traffic, countertops and to correct imperfections in new construction.

Note: If the surface will be polished, use the TEC® Level Set® Epoxy Primer before installing Level Set® Wear Topping. When surface will not be polished, all other substrates must be primed with TEC® Multipurpose Primer before installing Level Set® Wear Topping.

  • Rapid setting for quick return to service
  • Accepts foot traffic in 2-3 hours and rubber wheel traffic within 48 hours
  • Ultra-smooth, cured surface with 6000 psi (42.1 MPa)
  • Accepts stains, sealers and coatings within 24 hours
  • Integral colorant can be added at the time of mixing
  • Single lift applications from 1⁄4"-2" (6-50 mm) neat; can be extended to 5" (127 mm) with appropriate aggregate
  • Barrel or pump in place
  • Mold and mildew resistant
  • Contributes to LEED® project points
  • VOC 0

Product Added.

View My Submittal.

Add to My Submittal
Why use the My Submittal tool? Adding an item to your My Submittal form allows you to easily compile a list of products that can then be submitted for documentation such as SDS/Data sheets and warranty information.

PDF Downloads

Level Set® Wear Topping

PDS

EnglishDownload EspañolDownload

SDS - White

EnglishDownload

SDS - Bright White

EnglishDownload

SDS - Gray

EnglishDownload

TEC® Level Set® Wear Topping Sell Sheet

EnglishDownload

Limited Product Warranty

EnglishDownload EspañolDownload Français (Canadien)Download